Next: TESTC/CCD
Up: Test Commands
Previous: TESTD/CCD
The command determines the shutter error distribution. The error
distribution is computed as follows. If
has a total
reported exposure time of t1 seconds, and the shutter is
opened and closed
times (including the beginning and
end of the exposure) and img2 has a total exposure time of
t2 seconds, and the shutter is only opened and closed once,
then the final shutter error frame
is determined by:
|
(27.1) |
An image and a contour plot of the error frame are produced.
Petra Nass
1999-06-15