next up previous contents
Next: ccdtest Up: Standard Reduction Commands Previous: Standard Reduction Commands

   
ccdred

ALIGN/MOSAIC in_frm in_tab out_frm method,data [nxrsub,nyrsub] [xref,yref]
[x_size,y_size]
Align the elements of the mosaiced frame
BIAS/CCD [in_fram] [out_fram] [bs_fram]
Correct the input frame for the bias offset using a bias frame
COMBINE/CCD exp [in_spec] [out_fram]
Combined a number of CCD frames of the same exposure type
CREATE/MOSAIC in_cat out_frm out_tab nx_sub,ny_sub [not1,not2,...]
[nocol,norow]
Mosaic a set of (infrared) ccd frames
DARK/CCD [in_fram] [out_fram] [dk_fram]
Correct input frame for dark current offset using a dark current frame
FIT/MOSAIC in_frm in_msk in_tab out_frm [match] [nxrsub,nyrsub] [xref,yref]
[x_size,y_size]
Align and match the elements of the mosaiced frame
FIXPIX/CCD [in_fram] [out_fram] [fix_table] [fix_meth]
Do a correction of bad pixels in the input frame
FLAT/CCD [in_fram] [out_fram] [ff_fram]
Do a flat field correction of the input frame
FRCOR/CCD [in_spec] [out_frm] [xboxmn,xboxmx] [yboxmn,yboxmx] [clip]
[lowsig,higsig]
Make fringe correction frame(s0 from sky frames
FRINGE/CCD [in_fram] [out_fram] [fr_fram] [fr_scale]
Do a fringe correction of the input frame
HELP/CCD [keyword]
show the parameter setting of the current CCD session
ILLCOR/CCD [in_spec] [out_frm] [xboxmn,xboxmx] [yboxmn,yboxmx] [clip]
[lowsig,higsig]
Make flat field illumination correction frame(s)
ILLFLAT/CCD [in_spec] [out_frm] [xboxmn,xboxmx] [yboxmn,yboxmx] [clip]
[lowsig,higsig]
Apply correction to a flat field to remove illumination pattern
ILLUMINATION/CCD [in_fram] [out_fram] [il_fram]
Do an illumination correction of the input frame
INIT/CCD [name]
Initialize the CCD package, optionally using the setting of a saved session
LOAD/CCD [intr]
Load instrument/detector specifications into the CCD context
MATCH/MOSAIC in_frm in_tab out_frm method,data [match] [nxrsub,nyrsub]
[xref,yref] [x_size,y_size]
Align and match the elements of the mosaiced frame
MKREDT/CCD out_tab
Create CCD empty table with columns for science and calibration frames
OVERSCAN/CCD [in_fram] [out_fram] [sc_area] [mode]
Correct the input frame for the bias offset in the overscan region
REDUCE/CCD [in_spec] [out_frm]
Do the (partial) calibration of one or more frames
SAVE/CCD name
save current CCD session
SET/CCD keyw=value [...]
Define the values of parameters in the current CCD session.
SHIFT/MOSAIC out_tab [curs_opt] [csx,csy] [clear_opt]
Get x and y shifts of the subraster in the mosaic frame
SHOW/CCD [subject]
Show (part of) the setup of the CCD package
SKYCOR/CCD [in_spec] [out_frm] [xboxmn,xboxmx] [yboxmn,yboxmx] [clip]
[lowsig,higsig]
Make sky illumination correction frame(s)
SKYCOR/CCD [in_spec] [out_frm] [xboxmn,xboxmx] [yboxmn,yboxmx] [clip]
[lowsig,higsig]
Apply sky observation to flat field to remove illumination pattern
TRIM/CCD [in_fram] [out_fram] [im_sec] [del_flg]
Extract the useful data from the ccd frame.

next up previous contents
Next: ccdtest Up: Standard Reduction Commands Previous: Standard Reduction Commands
Petra Nass
1999-06-15