Using both cursors a region of interest (ROI) is supported. The ROI
can have rectangular or circular shape, its center is moved
via the mouse and its size is adjusted via the arrow keys.
The resizing of the ROI may be done in small or large increments. This
is controlled via the number keys 0, 1, 2, ..., 9 on the keyboard.
Pressing the 0-key corresponds to an increment of a single screen pixel,
whereas 1, 2, ..., 9 lead to larger increments.
The cursor position can be read by pressing the ENTER button which
is the leftmost button on the mouse. To exit from a
command which uses interactive cursor input,
press the EXIT button which is the rightmost button on the mouse.
The middle button is currently not used in MIDAS (it behaves like the EXIT
button), but may be employed in the future.
The RETURN key on the keyboard serves as an EXECUTE button.
The EXECUTE button works usually like the ENTER button,
only in some very
special cases its functionality is different from the ENTER button.
If so, it is explained in the relevant help info, an example are the
MAGNITUDE/... commands.
Pressing the ENTER button on the mouse requires a stable hand.
If you press the ENTER button and only slightly move the mouse by
doing so,
this will be interpreted by the display server as
a Cursor Move instead. Therefore, it may be
safer to move the cursor via the mouse but get the cursor input with
the EXECUTE button.
You can also create a special cursor window for each display. Then, the
area in the display window in cursor focus is also shown in that cursor window
with a fixed magnification.
Commands associated with cursors are:
GET/CURSOR - read cursor positions
SET/CURSOR - define a specific cursor shape
CREATE/CURSOR_WINDOW - create cursor w. for existing display
DELETE/CURSOR_WINDOW - delete a cursor w.